Brel motor support

Antworten
Erwin
Beiträge: 19
Registriert: Mo 14. Mär 2016, 20:45

Brel motor support

Beitrag von Erwin » Do 13. Apr 2017, 20:57

Hello,

Does the light manager support Brel Motors or is it planned to support it in the near future?

https://www.brel-motors.nl

Thank you.

Br,

Erwin

Benutzeravatar
jbmedia
Administrator
Beiträge: 1024
Registriert: Mi 17. Feb 2016, 13:42

Re: Brel motor support

Beitrag von jbmedia » Fr 14. Apr 2017, 15:34

These devices look very much like Romotec, Rolladen 7 or IMF, which are fully supported. So it is very likely that Brel works, too. However, we never tested it so far, so we can't give a guarantee.
Wir wünschen viel Spaß mit den Produkten und einen erfolgreichen Tag! Ihr jbmedia Team

Erwin
Beiträge: 19
Registriert: Mo 14. Mär 2016, 20:45

Re: Brel motor support

Beitrag von Erwin » Fr 14. Apr 2017, 19:28

Thanks,

I'm still using the lightmanager pro. Which protocol should I use than uniroll, fs20 or Intertechno or are these motors not supported by the lightmanager pro?

Benutzeravatar
jbmedia
Administrator
Beiträge: 1024
Registriert: Mi 17. Feb 2016, 13:42

Re: Brel motor support

Beitrag von jbmedia » Sa 15. Apr 2017, 16:07

We are sorry, this works with the Light-Manager Air only. :|
Wir wünschen viel Spaß mit den Produkten und einen erfolgreichen Tag! Ihr jbmedia Team

Erwin
Beiträge: 19
Registriert: Mo 14. Mär 2016, 20:45

Re: Brel motor support

Beitrag von Erwin » So 16. Apr 2017, 20:56

To bad. No firmware updates planned for the pro?

Simon
Beiträge: 172
Registriert: Sa 19. Mär 2016, 20:03

Re: Brel motor support

Beitrag von Simon » Mo 1. Mai 2017, 20:36

Regarding your other thread (magnet contacts etc. ). Maybe it's better to upgrade your LM. With the Air you will have a great support with different protocols. The Pro is not so flexible as the Air - several things are working with the Pro, but the mostly things (especially RC learning) are not supported by the Pro.

You can see the supported protocols @
http://cms.jbmedia.de/index.php?option= ... 57&lang=de

Maybe your solution (other thread) will working with the Pro, but you must have a look to the protocol (IR should work, for RC magnet contacts, pls have a look the the page see above).

Erwin
Beiträge: 19
Registriert: Mo 14. Mär 2016, 20:45

Re: Brel motor support

Beitrag von Erwin » Di 2. Mai 2017, 09:56

Thank you for your response. Looks like I really have to upgrade. I hope that I can turn in my pro and get a discount 😉

Benutzeravatar
jbmedia
Administrator
Beiträge: 1024
Registriert: Mi 17. Feb 2016, 13:42

Re: Brel motor support

Beitrag von jbmedia » Di 2. Mai 2017, 14:51

Hi Erwin,

if you purchased the Pro directly from us, a discount for the Air should be possible. Just contact us by e-mail.

Unfortunately the Pro came to its memory limits years ago already. Including new protocols would mean to kick out others. However, the Air opens up a new world because of its integration of Wi-Fi as well as RF receivers. This will push your home-automation a lot forward, which is something the Pro could not do in any case.
Wir wünschen viel Spaß mit den Produkten und einen erfolgreichen Tag! Ihr jbmedia Team

Antworten